|
|
Stainless Steel200 Series Stainless Steel
ProductsSlit-to-Width Coils
Our inventory of stainless steel is available in slit to width coils, sheared to size blanks, processed strips, flat bar and cut to length sheets. * We specialize in narrow slitting *.
Mechanical Finish Designations#1 Finish – Hot rolled, annealed and pickled. #2D Finish – A uniform, dull silver gray mill finish that is applied to thinner stainless steel coils, the thickness of which has been reduced by cold rolling. #2B Finish – A bright cold rolled mill finish commonly produced in the same manner as No. 2D, except that the final light cold rolling pass is done using polished rolls. #3 Finish – A semi-polished surface achieved by finishing with the equivalent of a 80 to 120-grit abrasive. This finish has a pronounced grit line. #4 Finish – Also called brushed, directional or satin finish. A number 4 finish is characterized by fine polishing grit lines that are uniform and directional in appearance. The final abrasive used in the process is 150 to 220 grit. #6 Finish – Polished finish achieved with the equivalent of a 240-grit abrasive. Finer grit lines and higher reflectivity than a No. 4 finish. #7 Finish – Highly reflective surface obtained with the equivalent of a 320-grit abrasive. Minimal grit lines. #8 Finish or Mirror Finish – Produced by polishing with at least a 320 grit belt or wheel finish. The part is then sisal and color buffed to achieve a mirror-like finish. |
  All Processing Done In-House  |
|||||||||||||||
| ISO 9001:2008 ISO 17025:2005 Compliant |
|
Stainless Steel |
|||||||||||||||
| |
|||||||||||||||||
